Wholesale Marketplace
Home >

AC900 Wireless Bridge 10KM PTP/PTMP WiFi CPE with LED Display - Model CPE890D-P24

Categories 5.8 GHz Outdoor CPE
Brand Name: OEM
Model Number: CPE890D
Certification: CE, FCC, RoHs TUV
Place of Origin: China
MOQ: 200pcs
Price: $49/PCS~$55/PCS
Payment Terms: T/T
Supply Ability: 60000pcs per month
Delivery Time: 5~8 working days
Packaging Details: Appearance Size: 315mm*145mm*80mm
RF Power: 500mW
PTP: 10KM
11AC: 900Mbps
  • Product Details
  • Company Profile

AC900 Wireless Bridge 10KM PTP/PTMP WiFi CPE with LED Display - Model CPE890D-P24


Description:


CPE-890D is a high power industrial 5G outdoor CPE with 10KM Wi-Fi range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; Then it with LED display to show and configure CPE’s operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.


900Mbps Data Rate & Gigabit WAN/LAN Ports:


CPE-890D features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high-speed internet access and more end users access


5GHz frequency, more channels, lower latency, higher stability:


CPE890D with the full frequency of 5020~6100MHz, more than 200 channels available, it avoids the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.


10KM PTP/PTMP Distance;


Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, 18dBi MIMO high gain panel antenna, greatly increase the Wi-Fi range to 10KM distance, then supply the stable Wi-Fi signal for users.


LED Display:


CPE-890D with LED display to show AP/Client operation mode, Channels, IP address and RF Power; What’s more, it is easy to setup CPE-890D IP address, RF Power, Channels by setting switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.


Multiple operation modes for Multiple Application:


CPE-890D support Gateway, WISP, Wireless AP, Wi-Fi Repeater, WDS operation mode, it is widely used in Point to Point(PTP), Point to Multi-Point(PTMP) Connection, WISP Connection, and Wireless Security;


Access Controller System & Cloud Management System:


With Access Control System under AP/WDS operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore...


Then work with Cloud Management System, easy to do central and remote management, advertisement and multi-authentication make this AP more professional in Wi-Fi Projects.


Main Features:

  • Comply with IEEE 802.11ac/a/n, 5GHz,900Mbps Data Rate
  • 1*10/100/1000Mbps WAN Port, 1*10/100/1000Mbps LAN Port
  • 500mW high power, build in 18dBi MIMO panel antenna, stronger signal strength, more wireless coverage
  • Support passive PoE, 24V
  • Support SSID broadcasting, Multi SSID up to 4, then support tag VLAN based on SSID.
  • Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP, WDS operation mode
  • With the function of build in the firewall, IP filter, URL filter, and MAC filter
  • Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in a different environment
  • Support DDNS, VPN pass through, Port forwarding and DMZ host
  • Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security

Product Spec.:


Hardware:
ChipsetQualcomm QCA9563+QCA9882+QCA8334
Standard802.11ac/a, MIMO technology
Memory128MB DDR2 RAM
Flash16MB
Interface1 * 10/100/1000Mbps RJ45 WAN Port
1 * 10/100/1000Mbps RJ45 LAN Port
1 * LED display, 1 * F(Function) switch button, 1 * S(Select) button, press it to setup WDS PTP/PTMP connection
1 * Reset button, press 15 seconds to revert to default setting/press 1 seconds to finish the WDS PTP/PTMP connection
AntennaBuild in 18dBi MIMO Panel Antenna
Power consumption24V PoE, <8W
Size315mm * 145 mm * 80mm
RF Data

Frequency

5GHz: 802.11a/ac
5GHz: Standard: 5150~5825MHz, Debug: 5020~6100MHz
Throughput900Mbps
ModulationOFDM = BPSK,QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Receive Sensitivity& RF Power
RF Power802.11a54M24±2dBm6M27±2dBm
802.11n HT20MCS723±2dBmMCS026±2dBm
802.11n HT40MCS722±2dBmMCS025±2dBm
802.11ac HT80MCS921±2dBmMCS024±2dBm
Receive Sensitivity802.11a54M-72dBm6M-90dBm
802.11n HT20MCS7-70dBmMCS0.-88dBm
802.11n HT40MCS7-68dBmMCS0.-86dBm
802.11ac HT80MCS9-58dBmMCS0.-85dBm
EVM802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB
Firmware Features:
Operation modeWireless AP, Gateway, WISP, Wi-Fi Repeater, WDS
WAN TypeDynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSIDMultiple SSID up to 4
FirewallDoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding
ProtocolsIPv4
Others:
Package Contents

900Mbps Dual Band wireless access point

Ethernet Cable

Quick Installation Guide

Setting Accessory

System RequirementsMicrosoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
Environment

Operating Temperature: -30~55 ℃

Storage Temperature: -40~70 ℃

Humidity: 5%~95% non-condensing

ManagementFirmware GUI, Remote Management, WLAN Controller, Cloud Management System


Quality AC900 Wireless Bridge 10KM PTP/PTMP WiFi CPE with LED Display - Model CPE890D-P24 for sale
Send your message to this supplier
 
From:
To: Shenzhen Yunlink Technology Co., Ltd.
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0