Wholesale Marketplace
Home >

1.00mm Pitch Circuit Board Wire Connectors Crimp Housing Single Row 6 position

Categories Circuit Board Wire Connectors
Brand Name: HRT
Model Number: A1016H-06P
Certification: ISO9001/ ISO14001/UL/RoHS/REACH
Place of Origin: Dongguan, China(mainland)
MOQ: 5000 pcs
Price: Negotated
Payment Terms: TT, Western Union, PayPal, L/C
Supply Ability: 28 million pcs per month
Delivery Time: 5 to 8 working days after payment checked
Packaging Details: Bag with outside carton
Color: light-yellow
Pitch: 1.00mm
Material: LCP
Wire range: AWG30# to 32#
Flammability: UL94V-0
Row: Single
  • Product Details
  • Company Profile

1.00mm Pitch Circuit Board Wire Connectors Crimp Housing Single Row 6 position

1.00mm Pitch Circuit Board Wire Connectors Crimp Housing Single Row 6 position

1, The detailed specification excel

Basic size information
CategoryCrimp housings
Suitable terminalsA1007T series
Lock to mating partWith
Panel mountNo
Circuits6 pins
Wire insulation diameter0.80mm Max.
Terminal materialphosphor bronze
Terminal finishtin-plated or gold-flash
Electrical properties
Current Rating1A AC, DC
Voltage Rating60V AC, DC
Contact Resistance20mΩ Max
Insulation Resistance100mΩ min
Withstanding Voltage600V AC/minute
Mechanical properties
Temperature range-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report

Folllowing pictures are out testing report and exact engineering drawing for your information, please kindly check it, wish it can help you to get what you really need.

5. Mechanical Performance

Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#301.0kgf (Min)
AWG#321.0kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.0.80kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.0.80kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute0.50kgf (Min.)

Locking Strength


Mate the connectors and apply the force by pulling axially the housing at a rate of 25 ± 6 mm per minute. Strength is determined when locking device disengaged locking, or is broken by the load.1.50kgf (Min.)
5-7DurabilityWhen mated up to 30 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 20mΩ (Max.)

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-9Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance105±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

6-3Cold Resistance-40±3℃,96 hours (Based upon JIS C0020)

Temperature: 60±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 40mΩ (Max.)

Insulation Resistance 100MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -40℃ 30 minutes

b) +105℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 20mΩ (Max.)

6-6Salt SprayTin-plated 24 hours / Gold- plated 48 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt Initial
Insertion (Max.)Withdrawal 1st (Min.)Insertion 6th (Max.)Withdrawal 30th (Min.)

8. Applicable Wires:

AWG Size: AWG#30 UL1571 Insulation OD: Φ0.70mm

AWG#32 UL10064 Insulation OD: Φ0.42mm

9. Crimping Condition

Wire SpecificationCrimp Height(mm)Crimp Width(mm)
UL1571#300.700.51-0.540.65-0.700.70-0.750.80 MAX.
UL10064#320.420.48-0.520.60-0.650.70-0.750.80 MAX.

3, Applicated field of this product by graphical representation

This product is widely used in computer, household appliance and so on. You can get this message through the pictures.

Quality 1.00mm Pitch Circuit Board Wire Connectors Crimp Housing Single Row 6 position for sale
Send your message to this supplier
To: Dongguan Xinpei Plastic & Metal Electronic Co. Ltd
Characters Remaining: (0/3000)
Inquiry Cart 0