Wholesale Marketplace
Home >

nicked-plated shell 0.039 inch pitch PA66 material crimp type DF19 wire to board connector

Categories Wire to Board Connectors
Brand Name: HRT
Model Number: A1007H-NP
Certification: ISO9001/ ISO14001/UL/RoHS/REACH
Place of Origin: Dongguan, China(mainland)
MOQ: 5000 pcs
Price: USD0.001 to 0.5 per pcs
Payment Terms: TT, Western Union, PayPal, L/C
Supply Ability: 500 K pcs per month
Delivery Time: 5 to 8 working days after payment checked
Packaging Details: Bag with outside carton
Suitable terminals: A1007T series
Suitable wafer: A1017W series
Wire Insulation Diameter: 0.60mm Max.
Connector Type: Socket
Flammability: UL94V-0
Row: single
  • Product Details
  • Company Profile

nicked-plated shell 0.039 inch pitch PA66 material crimp type DF19 wire to board connector

1, The specification as below sheet


Basic size information
ColorWhite
Pitch1.00mm
MaterialPA9T
Mating lockwithout
Wire Termination MethodCrimping
Circuits8pins/14pins/20pins/30pins
Wire Insulation Diameter0.60mm Max.
Wire rangeAWG28# to 32#
Electrical properties
Current Rating1A AC, DC
Voltage Rating100V AC, DC
Contact Resistance30mΩ Max
Insulation Resistance500mΩ min
Withstanding Voltage500V AC/minute
Mechanical properties
Temperature range-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report


Testing report


1. Scope

This specification covers the requirements for product performance of 1.00mm pitch wire to board

connectors series.


2. Construction,Dimensions,Material & Plating

See the attached drawings


3. Ratings & Applicable Wires


ItemStandard
Rated Voltage (Max.)100V AC/DCInsulation O.D. 0.60mm (Max.)
Rated Current (Max.) And Applicable WiresAWG#281A AC/DC
AWG#300.9A AC/DC
AWG#320.8A AC/DC
Ambient Temperature Range-25℃ ~ +85℃*

*: Including terminal temperature rise


4. Electrical Performance


Test DescriptionProcedureRequirement
4-1

Contact Resistance


Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)30mΩ (Max.)
4-2Insulation ResistanceMate connectors, apply 200V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)500MΩ (Min.)
4-3Dielectric Withstanding VoltageMate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)No Breakdown.
4-4Contact Resistance on Crimped PortionCrimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.5mΩ (Max.)

5. Mechanical Performance


Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#281.0kgf (Min)
AWG#300.8kgf (Min)
AWG#320.5kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.0.50kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.0.50kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute0.30kgf (Min.)
5-6DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 60mΩ (Max.)
5-7Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-8Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)


6. Environmental Performance And Others


Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

Insulation Resistance 10MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

6-6Salt SprayTin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9Solderability

Soldering Time: 5±0.5 sec.

Solder Temperature: 245±5℃

Solder Wetting 95% of immersed area must show no voids, pin holes
6-10Resistance to Soldering Heat

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Actuator Insertion/Withdrawal Force

[Unit : kgf]

CircuitsAt Initial
Insertion (Max.)Withdrawal (Min.)
081.60.20
142.80.35
204.00.50
306.00.75


3, FAQ about our company

1, Q: Do you have a catalogue? Can you send me the catalogue to have a check of all your products?
A: Yes, We have product catalogue. Please contact us on line or send an Email to send the catalogue.

2, Q: Do you have a price list? I need your price list of all your products.
A: We do not have a price list of all of our products. Because we have so many items, and it's impossible to mark all of their price on a list. And the price are always changing because of the producing cost. If you want to check any price of our products, please feel free to contact us. We will send offer to you soon!

3, Q: I can’t find the product on your catalogue, Can you make this product for me?
A: Our catalogue shows most of our products, but not all. So just let us know what product do you need, and how many do you want. If we do not have it, we can also design and make a new mould to produce it. For your reference, making a ordinary mould will take about 20-35 days.


4, Our Services

Customizable specification drawing and material is avaiable.More than 12 years experience in conenctor, wire housing, wafer, terminals, other metal parts, etc. Products samples is free, you just need pay for the freight. Besides, we have a strict quality control systerm, so we are accepted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth,BYD, LuXshare,etc.

Quality nicked-plated shell 0.039 inch pitch PA66 material crimp type DF19 wire to board connector for sale
Send your message to this supplier
 
From:
Enter your email please.
To: Dongguan Xinpei Plastic & Metal Electronic Co. Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0