Wholesale Marketplace
Home >

wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector

Categories Wire to Board Connectors
Brand Name: HRT
Model Number: A2006H-NP
Certification: ISO9001/ ISO14001/UL/RoHS/REACH
Place of Origin: Dongguan, China(mainland)
MOQ: 5000 pcs
Price: negotiated
Payment Terms: TT, Western Union, PayPal, L/C
Supply Ability: 500 K pcs per month
Delivery Time: 5 to 8 working days after payment checked
Packaging Details: Bag with outside carton
Color: white
Pitch: 2.00mm
Material: PA66
Wire range: AWG28# to 22#
Flammability: UL94V-0
Row: single
  • Product Details
  • Company Profile

wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector


1, The specification of the product including basic size information, electrical and mechanical properties.


Basic size information
Suitable terminalsA2211 series
Suitable waferA2006 series
Mating lock to partwith
Wire Termination Methodcrimping
Circuits2 to 16 pins
Wire Insulation Diameter1.40mm Max.
Mounting sideStandard on-Board
Terminals materialphosphor bronze; tin-plated finish
Electrical properties
Current Rating3A AC, DC
Voltage Rating250V AC, DC
Contact Resistance30mΩ Max
Insulation Resistance1000mΩ min
Withstanding Voltage1000V AC/minute
Mechanical properties
Operating Temperatureemperature range-25℃ to 85 ℃
Other information please kindly check the following picture.

2, Related drawing and report


Mechanical Performance


Test DescriptionProcedureRequirement
5-1Actuator Insertion & Withdrawal ForceInsert and withdraw connectors at the speed rate of 25±3mm / minute.Refer to paragraph 7
5-2Crimping Pull Out ForceFix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)AWG#224.0kgf (Min)
AWG#243.0kgf (Min)
AWG#262.0kgf (Min)
AWG#281.0kgf (Min)
AWG#300.8kgf (Min)
5-3Terminal Insertion Force.Insert the crimped terminal into the housing.1.50kgf (Max.)
5-4Terminal/Housing Retention Force.Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.1.50kgf (Min.)
5-5Pin Retention ForceApply axial push force at the speed rate of 25±3mm / minute1.50kgf (Min.)
5-6Latch Yield StrengthMate connectors and pull apart until both latches break at the speed rate of 25±3mm / minute2.00kgf (Min.)
5-7DurabilityWhen mated up to 50 cycles repeatedly by the rate of 10 cycle per minute.Contact Resistance 60mΩ (Max.)
5-8Vibration

Amplitude: 1.5mm P-P

Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

(Based upon MIL-STD-202 Method 201A)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

Discontinuity 1 μsec.(Max.)

5-9Physical Shock490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

Environmental Performance And Others


Test DescriptionProcedureRequirement
6-1Temperature RiseCarrying rated current load.(Based upon UL 498)30℃(Max.)
6-2Heat Resistance85±2℃, 96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

6-3Cold Resistance-25±3℃,96 hours (Based upon JIS C0020)
6-4Humidity

Temperature: 40±2℃

Relative Humidity : 90~95%

Duration: 96 hours

(Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

Insulation Resistance 1000MΩ (Min.)

Dielectric Withstanding Voltage Must meet 4-3

6-5Temperature Cycling

5 cycles of:

a) -55℃ 30 minutes

b) +85℃ 30 minutes

(Based upon JIS C0025)

Appearance No Damage.

Contact Resistance 60mΩ (Max.)

6-6Salt SprayTin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
6-7SO2 Gas

24 hours exposure to 50±5ppm.

SO2 gas at 40±2℃.

6-8NH3 Gas40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

3, we can offer various fast delivery way for you .


We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.


Quality wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector for sale
Send your message to this supplier
 
From:
To: Dongguan Xinpei Plastic & Metal Electronic Co. Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0