Industrial Forklift Battery 24 Volt Automatic Agitation System
Wooden Case Packaging
|Type||Forklift Traction Battery|
|Technology||Tubular Positive Plates|
|Connection Type||Screw connection|
|Steel Tray Size||Customized|
Product Catalogs --- DIN standard
|7PzS350||350||137x198x288x319||21.2||2 or 4||2|
|8PzS400||400||155x198x288x319||24.0||2 or 4||2|
|9PzS450||450||173x198x288x319||26.8||2 or 4||2|
|10PzS500||500||191x198x288x319||29.6||2 or 4||2|
1. High quality flooded lead acid battery
2. >= 1500 times cycle life.
3. High performance tubular positive plates
4. Meet IEC 60254 standard.
5. CE,ISO9001 and ISO14001.
6. Lower distilled water consumption
7. Environmental and healthy
8. Nice design and good quality
9. Easy to use and durable
10. Low current recharge
11. Competitive price
12. Wooden case packaging
13. Automatic watering syste and Agitation system.
14. Larger and thicker plate means less internal corrosion
1. How to do the maintenance of battery?
1) Fill water:fill distilled water or deionized water according to
electrolyte level, don’t fill too much distilled water in order to
delay filling time, too much distilled water would cause lower
specific gravity, electrolyte would spill over,and this situation
would corrode metal box and cables, and effect battery’s service
life and creepag.
2) Chaging:There is gas when charging, so need to keep ventilative
environment, and no naked light. And the oxygen and acidic gas by
charging would affect around environment. There would have electric
arc when pull out the charging plug, please cut off the charger’s
switch and then pull out the plug. There are much hydrogen after
finish the charge, naked light is not allowed.
3) Equalizing charge:battery should need a equalizing charge every
month(meanssmall charging current but long time charge), in order
to keep battery’s capacity and long service life.
Method of equalizing charge:
Firstly charge the battery as regularly, after finish the
charge,press the switch of equalizing charge,charge the battery
24-36 hours continuely. Within the equalizing charge,need to make
the record of every single cell’s voltage, denstity and
temperature, after finish the equalizing charge, need to adjust
electrolyte’s density and level as per using manual.
4) Connector,leading wire,cap’s maintenance: must be operated by
the professional engineer.
5) Clean:battery should keep surface to be clean, if surface has
the dirty things would cause short circuit, also cause terminal and
connectors to be corroded. Please use wet cloth to clean battery in
order to avoid static electricity.If there is no leakage hole at
the bottom of metal box, pleas avoid using water to clean the
battery, in order there are too much water to corrode metal box, if
there is leakage hole at the bottom of metal box, you can use water
to clean the battery.
2. How to do the storage of forklift battery?
1) Storage location:do not make battery short circuit;there would
cause short circuit after the rain, must keep the battery in the
open air and shady location.
2) Used batter:used battery still have capacity, please keep the
battery as per storage method.
3. How about Electrolyte’s operation?
1) Check density:use inhale densimeterto check density, do not
spill electrolyte out from the battery, and make sure wear the
2) Other operation: Should refer to professional engineer,
especially when fill the electrolyte
3) Electrolyte’s leakage:urgent handle is needed when battery’s
turn over or destroy happens.