Auto Paint Room Waterborne Spray Booth Color Optional With Steel
1, 7.5KW turbo fan for intake, 7.5KW turbo fan for extraction.
2, Complete steel basement in the ground.
3. Air units at back side.
4, Two sets side by side.
5, All LED lights, energy save and more illumination.
6, Color white, blue, orange and red is optional.
7, Full grilles.
8, Full down draft.
9, With pressure protect device.
In painting, outside fresh air comes into the heating generators
through the pre-filter system, and enters into the plenum, then
filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying, After
painting, hot air goes from heating
generators to plenum, then enters room after filtered by ceiling
filter, providing heat that is necessary for baking of cars
|Inside dimension||8050×3900×2650 mm (L×W×H)|
|Outside dimension||9550×4000×3150 mm (L×W×H)|
|Front door||Folding door, 4 folds, 3200×2600 mm (W×H), without frame, aluminium
alloy window frame, colour: Blue, with pressure lock.|
|Emergency door||1 units, 800×2000mm (W×H), colour: white, aluminium alloy window
|Basement||Galvanized steel assemble, 300mm high, underground, with adjustable
bolts, quadrate steel support, full grilles made by flat bar and
twisted steel, galvanized.|
|Wall panel||Thickness: 50mm, width:1150mm, tongue and groove structure, 0.476mm
colour steel with 50mm thick rock wool inside, colour: white.|
|Light||Ceiling Lights: 8Units×4Pcs=32Pcs×58W, side Lights:
11Units×4Pcs=44Pcs×18W, with electronic ballasts, horizontally set,
lighting boxes are powered coated.|
|Generator cabinet||Inlet from back upper, outlet from back upper, aluminium alloy
steel frame; white coated steel outside, galvanized steel inside,
filled with heat preservation material in the middle.|
|Intake and Exhaust system||Inlet: 1×7.5KW turbo fan, power: 7.5KW, air capacity: 25000m3/h.|
|Outlet: 1×7.5KW turbo fan, power: 7.5KW, air capacity:
|Heating system||RIELLO RG5S diesel burner, stainless steel heat exchanger,
pneumatic damper actuates from spraying to baking cycle. Max.
heating productivity: 260000kcal/h, maximum temperature: 80 degree|
|Purification system||Pre-filter, ceiling filter, fibreglass filter, activated carbon
|Water base paint system||On the both side of ceiling and middle with water base paint
system, stainless steel nozzle, with pressure extra fan.|
|Control system||Spraying, heat spraying, baking, time setting, lighting switch,
failure indicator, thermostat, power supply switch, emergency stop,
hour meter, temperature limit controller, pressure gauge, pressure
alarm system, All motors are normal start.|
|Total power||18.5KW (Power supply 3*380V, 50HZ)|