DN15 Nylon Body Dry - Dial Type Multi Jet Water Meter With Pulse
Measuring the total volume of cold portable water passing through
1. Multi-jet, dry-dial, easy for maintenance;
2. Magnetic drive reliable characteristic, long working life;
3. Vacuum sealed register ensures the dial keep free from fog and
frost, Keep the reading clear in a long term service;
4. Technical data conform to international standard ISO4064 Class
5. Pulse with 10L/pulse,100L/pulse,1000L/pulse
The operation description of the two reed switches system
Please see the diagram of the two reed switches system below, the
two reed switches would be operated “ON” or “OFF” respectively by
the magnet fitted to the pointer or gear during its running on the
register, but never “ON” at the same time, unless the out-magnet
attacks. The two reed switches operate two “ON” and “OFF” in one
round of the pointer or the gear means one signal output, this
principle prevent the loss or over-counting of the signal output
due to the switches jogging or the pipe vibrating, so assures
reliability of the signal output.
- Water temperature: ≤ 40 ℃ for cold water meter ; ≤ 90 ℃ for hot water meter.
- Work pressure : ≤ 1.0Mpa or1.6Mpa as your request
Maximum permissible error
- in the lower zone from minimum flow inclusive up to but excluding
transitional flow is ±5%.
- in the upper zone from transitional flow inclusive up to and
including overload flow is ±2%; Hot water meter ±3%
Main technical data
|Type||Size (mm)||Class||Overload Flow||Permanent Flow||Transitional Flow|
Flange connect ISO 7005-2:1988
If you need other types also, pls contact us.