HTE electrodeposited ED electrolytic copper foil(High temperature elongation electrodeposited electrolytic ED Copper foil)
single side side treatment low profile foil in back/red.
Thickness: 0.012-0.070 mm
Width: 5-520 mm
Length: 500-5000 M
ID: 76 mm,152 mm
1. the treated foil in gray or red
2. High peel strength
3. Good etch ability
4. Excellent adhesion to etching resist
5. Anti foil cracking by high elongation at elevated temperature
6. Eco-friendly products and processes
1. Polyimide board
2. Epoxy board
Compare between CA copper foil and ED copper foil
1. Process: rolled copper foil (Rolling process),ED copper foil
2. Strength toughness: rolled copper foil is a flaky crystalline structure, so the
strength and toughness is better than electrolytic copper foil, so
most of the rolling copper foil used in flexible printed circuit
3. Width: rolling copper foil width ≤ 620mm, electrolytic copper foil width
4. Density: rolled copper foil higher density, the surface is relatively
smooth, conducive to the production of printed circuit board after
the rapid transmission of the signal, so high-frequency high-speed
transmission, fine lines printed circuit board also used some
calendering copper Foil.
5. Surface treatment width:rolled copper foil be limited by Surface treatment widest effective
width of 520mm.
Q1: What's your guarantee?
A: All our products have 6 months guarantee after received goods,
if any quality problem can contact us.
Q2: What's your delivery time ?
A: The common delivery time is 5-35 working days. The specific
delivery time depends on the items and the quantity of your order.
Q3: What's your minimum order quantity?
A: The MOQ is 150 kg.
Q4: Can you supply the sample?
A: We can supply samples to check the quality before bulk order.
But the price will be sample price not wholesale price.
Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q6. what is your standard width?
A: 520mm and 620mm,we accept customization for the width. we can
cut it into any size that you demand after pass discussing.
Typical properties of High temperature elongation copper foil(for
epoxy &polyimide board)
|Nominal thickness||/||12um||1/2 OZ||3/4 OZ|
|Foil Profile||Shiny side (Ra)||սm||≤0.4||≤0.4||≤0.4||≤0.4||≤0.4||≤0.4|
3. Standard Width,1295(±1)mm,May according to the customer request
We test the peel strength with FR-4(Tg140) prepreg ,please
reconfirm with your pp.