Water resistance test chamber is used to test automobile and
motorcycle spare parts, such as car rearview mirror, car audio,
automotive electronics, automotive lighting, automotive lamps,
motorcycle lamps, motorcycle rearview mirror;
electrical and electronic products, watches, hardware, outdoor
lighting, electronic communication, locomotives, instrumentation,
aerospace, and waterproof strip industries.
Interior testing chamber can be custom made according to specific
※ Water testing standards based on IEC 60529IP code.
※ Testing chamber according to IPX1-IPX9 or customers’ products
※ Apply P.I.D+P.W.M Control method, precisely control water flow.
※ Adopts brushless DC motor, no start spark.
※ High sensitivity can detect any accident and start alarm in the
shortest time, ensure operator and chamber safety.
※ Exterior material is SUS#304 stainless steel plate with baking
paint, nice appearance and good corrosion resistance.
Take IEC60529/GB4208-2008 as example:
※ IPX1, IPX2 apply negative pressure suction device, ensure
operator is not water droplets, improving guarantee.
※ IPX3, IPX4 swing pipe adopts stepper motor drive, angle
precision, velocity can be set and adjusted, each nozzle with
rotary center radiation, testing is completed automatically by
compressed air and clean water
※ IPX5, IPX6 original nozzle with an angle adjusting device
※ IPX7, IPX8 automatic descending and ascending water level
※ IPX9K adopts high pressure pump, spraying style heating device
|Exterior Dimension||2000 × 1200 × 1930mm|
|Interior Dimension||1000 × 1000 × 1000mm|
|Water Spray Area||Swing Tube Diameter: 400mm||Nozzle Diameter|
|800×800mm||1sec AT 60°||3sec AT 180°||6.3mm||12.5mm|
|Micro-pore N=16||Micro-pore N=25|
|Test Frame||Ф300mm × (1-5) rpm|
|Water supply||tap water|